Land Rover Defender: Powertrain
Land Rover Defender 2020-2026 Service Manual / Powertrain
- Engine
- Engine - Description and Operation
- Engine - Diagnosis and Testing
- Engine Oil Vacuum Draining and Filling
- Crankshaft Pulley - Ingenium I4 2.0l Petrol
- Crankshaft Rear Seal - Ingenium I4 2.0l Petrol
- Camshafts - Engine Set
- Oil Cooler - Ingenium I4 2.0l Petrol
- Oil Filter Element
- Oil Pan - Ingenium I4 2.0l Petrol
- Oil Pump - Ingenium I4 2.0l Petrol
- Left Engine Mount - Ingenium I4 2.0l Petrol
- Right Engine Mount - Ingenium I4 2.0l Petrol
- Lower Timing Cover - Ingenium I4 2.0l Petrol
- Valves
- Camshaft Carrier
- Cylinder Head
- Upper Timing Chain
- Engine Front Cover - Ingenium I4 2.0l Petrol
- Intake Manifold - Ingenium I4 2.0l Petrol
- Upper Timing Cover
- Lower Timing Chain - Ingenium I4 2.0l Petrol
- Oil Filter Housing
- Oil Pump Drive Chain - Ingenium I4 2.0l Petrol
- Continuous Variable Valve Lift
- Continuous Variable Valve Lift Oil Temperature Sensor
- Variable Camshaft Timing Actuator
- Drive Plate - Ingenium I4 2.0l Petrol
- Engine - Removal
- Engine and Ancillaries - Removal
- Engine - Installation
- Engine and Ancillaries - Installation
- Exhaust System
- Exhaust System - Description and Operation
- Exhaust System - Diagnosis and Testing
- Catalytic Converter - Ingenium I4 2.0l Petrol
- Exhaust System - Removal and Installation
- Front Silencer
- Rear Silencer
- Intermediate Pipe
- Fuel System
- Fuel System - General Information
- Fuel Tank and Lines - Ingenium I4 2.0l Petrol /Ingenium I4 2.0l Petrol - PHEV
- Acceleration Control
- Speed Control - Ingenium I4 2.0l Petrol/Ingenium I4 2.0l Petrol - PHEV
- Automatic Transmission
- Transmission Description - Vehicles With: 8HP76 8-Speed Automatic Transmission, AWD
- Transmission Description - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD
- Transmission Description - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD
- Diagnostics - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD
- Diagnostics - Vehicles With: 8HP70 8-Speed automatic Transmission AWD
- Diagnostics - Vehicles With: 8HP76 8-Speed Automatic Transmission, AWD
- Transmission Fluid Drain and Refill
- Transmission Fluid Level Check
- Main Control Valve Body
- Transmission Fluid Pan
- Torque Converter
- Selector Shaft Seal
- Input Shaft Oil Seal
- Output Shaft Seal
- Transmission - Ingenium I4 2.0l Petrol
- External Controls
- Automatic Transmission Cooling
- Transfer Case
- Transfer Case - Description and Operation
- Transfer Case - Diagnosis and Testing
- Transfer Case Draining and Filling
- Transfer Case Front Output Seal
- Transfer Case Front Output Shaft Bearing
- Transfer Case Rear Output Seal
- Transfer Case Rear Output Shaft Bearing
- Transfer Case Input Seal
- Transfer Case - Removal
- Transfer Case - Installation
- Four-Wheel Drive Systems
READ NEXT:
Engine
Engine - Ingenium I4 2.0l Petrol/Ingenium I4 2.0l Petrol - PHEV
SPECIFICATIONS
Lubricants, Fluids, Sealers and Adhesives
Capacities
General Specification
NOTE:
Numbers with a green background are
Component Location, Overview
COMPONENT LOCATION
COMPONENT LOCATION - EXTERNAL VIEW
OVERVIEW
The Ingenium I4 2.0L petrol engine is an inline 4 cylinder, turbocharged
engine that employs advanced modular
design principles.
The e
SEE MORE:
Front Row Seat Backrest Cover
REMOVAL AND INSTALLATION
GENERAL EQUIPMENT
PART(S)
REMOVAL
WARNINGS:
To avoid accidental deployment, the Restraints Control Module (RCM)
backup power supply must be
depleted. Wait at least 1 minute after disconnecting the startup battery
ground cable(s) before doing any
repair or adjustmen
Second Row Center Seatbelt Retractor
REMOVAL AND INSTALLATION
PART(S)
REMOVAL
WARNING:
To prevent accidental deployment, you must power down the Restraints
Control Module (RCM). Wait at
least 1 minutes after you disconnect the startup battery ground cable before
you do any work on the
Supplementary Restraint System (SRS). If y
© 2010-2026 Copyright www.lrdefender.org
