Land Rover Defender manuals

Land Rover Defender: Transmission - Ingenium I4 2.0l Petrol

READ NEXT:

 Removal

REMOVAL SPECIAL TOOL(S) 303-1069 Adapter, Wrench JLR-303-1569 Lifting Bracket, Engine JLR-303-1692 Engine Support JLR-303-1692-04 Engine Bridge Adaptor JLR-303-1713 Engine Brace Mountings GENERAL

 Installation

INSTALLATION SPECIAL TOOL(S) 303-1069 Adapter, Wrench JLR-303-1569 Lifting Bracket, Engine JLR-303-1692 Engine Support JLR-303-1692-04 Engine Bridge Adaptor JLR-303-1713 Engine Brace Mountings GE

 External Controls

SPECIFICATIONS COMPONENT TORQUE LOCATION

SEE MORE:

 Air Conditioning Compressor Commissioning

GENERAL PROCEDURES ACTIVATION CAUTION: Failure to follow this instruction may result in damage to the component. 1. Set the ignition to the on position, make sure the Air Conditioning (A/C) is in the off position. 2. Start the engine and allow to run for a minimum of 5 minutes. 3. Set the heater co

 Auxiliary Climate Control Assembly

REMOVAL AND INSTALLATION PART(S) REMOVAL CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all components must be sealed. NOTES: This procedure contains some variation in the illustrations depending on the vehicle specif

© 2010-2026 Copyright www.lrdefender.org