Land Rover Defender: Fuel System - General Information
Land Rover Defender 2020-2026 Service Manual / Powertrain / Fuel System / Fuel System - General Information
SPECIFICATIONS
Fuel Tank Capacities
.png)
READ NEXT:
Fuel System Pressure Release
GENERAL PROCEDURES
GENERAL EQUIPMENT
PRESSURE RELEASE
1. Always follow the Petrol and Petrol-Ethanol Fuel Systems Health and Safety
Precautions, before any
repairs are done to the fuel system.
2. Re
Fuel Tank Draining
GENERAL PROCEDURES
SPECIAL TOOL(S)
310-123
Locking Ring, Fuel Tank
GENERAL EQUIPMENT
PART(S)
DRAINING
WARNING:
Be prepared to collect escaping fuel.
CAUTION:
Before disconnecting any components, ma
High/Low-Pressure Fuel System Bleeding
High-Pressure Fuel System Bleeding
GENERAL PROCEDURES
WARNING:
Avoid flames, sparks or lighted substances.
CAUTION:
This procedure is necessary if any of the following fuel system components
are remo
SEE MORE:
Catalytic Converter - Ingenium I4 2.0l Petrol
REMOVAL AND INSTALLATION
SPECIAL TOOL(S)
JLR-303-1666
Remover/Installer, NOx/Oxygen Sensor
PART(S)
REMOVAL
WARNING:
Observe due care when working near a hot exhaust system.
NOTE:
This procedure contains some variation in the illustration depending
on the vehicle specification, but
essential i
Seats - [+] 5 Seat Configuration - Operation
FRONT ROW SEAT - VEHICLE WITHOUT SEAT MEMORY
A switched power supply from the Rear Junction Box is used to operate the
front row seat switchpacks.
On vehicles without seat memory, the seat switchpacks are connected directly to
the seat adjustment motors.
Operating 1 of the adjustment switches on
© 2010-2026 Copyright www.lrdefender.org
