Land Rover Defender: Speed Control - Ingenium I4 2.0l Petrol/Ingenium I4 2.0l Petrol - PHEV
Land Rover Defender 2020-2025 Service Manual / Powertrain / Fuel System / Speed Control - Ingenium I4 2.0l Petrol/Ingenium I4 2.0l Petrol - PHEV
SPECIFICATIONS
Torque Specifications
COMPONENT TORQUE LOCATION
.png)
.png)
.png)
- Speed Control - Description and Operation
- Speed Control - Diagnosis and Testing
- Cruise Control Module Adjustment
- Cruise Control Module
READ NEXT:
Speed Control - Description and Operation
COMPONENT LOCATION
COMPONENT LOCATION - 1 OF 1
NOTE:
Right Hand Drive (RHD) vehicle is shown, Left Hand Drive (LHD) vehicle is
similar.
Image Processing Module (IPMA)
Powertrain Control Module (P
Speed Control - Diagnosis and Testing
DIAGNOSIS AND TESTING
PRINCIPLES OF OPERATION
For a detailed description of the Speed Control system, refer to the relevant
Description and Operation section in the
workshop manual.
INSPECTION AND VE
Cruise Control Module Adjustment
GENERAL PROCEDURES
GENERAL EQUIPMENT
CHECK
WARNING:
This procedure requires road testing the vehicle. Make sure to follow the local
highway code during the road
test.
1.
The Cruise Control Module
SEE MORE:
Steering Column - Removal and Installation
REMOVAL AND INSTALLATION
GENERAL EQUIPMENT
PART(S)
REMOVAL
WARNING:
To prevent accidental deployment, you must power down the Restraints Control
Module (RCM). Wait at least
1 minute after you disconnect the startup battery ground cable before you do any
work on the Supplementary
Restraint System
The exterior
Following cleaning of the vehicle's
exterior particularly with a pressure
washer, it is recommended that the
vehicle is taken for a short drive to dry
out the brakes. Wet brakes may impair
the vehicle's ability to safely slow down
which may result in damage to the
vehicle.
Make sure the tail pipe
© 2010-2025 Copyright www.lrdefender.org
