Land Rover Defender: Interior Trim and Ornamentation
Land Rover Defender 2020-2026 Service Manual / Body and Paint / Interior Trim and Ornamentation
- Door Trim Panel Inspection
- Interior Trim Inspection
- A-Pillar Lower Trim Panel
- A-Pillar Trim Panel
- B-Pillar Lower Trim Panel
- B-Pillar Upper Trim Panel - 110
- B-Pillar Upper Trim Panel - 90
- C-Pillar Trim Panel - 90
- C-Pillar Upper Trim Panel - 110
- D-Pillar Trim Panel - 110
- Engine Cover - Ingenium I4 2.0l Diesel
- Engine Cover - Ingenium I4 2.0l Petrol
- Engine Cover - Ingenium I6 3.0l Petrol
- Front Door Trim Panel
- Front Treadplate
- Headliner - 110
- Left Loadspace Trim Panel - [+] 7 Seat Configuration, 110
- Left Loadspace Trim Panel - 110, Vehicles With: 5 Seats
- Right Loadspace Trim Panel
- Right Loadspace Trim Panel - [+] 7 Seat Configuration, 110
- Right Loadspace Trim Panel - 90
- Rear Door Trim Panel
- Rear Treadplate
- Sun Visor
- Tailgate Trim Panel
- Loadspace Upper Trim Panel - 90
- Rear Quarter Trim Panel - 90
READ NEXT:
Door Trim Panel Inspection
DESCRIPTION AND OPERATION
LEATHER TRIM PANEL
Leather is a natural product, therefore it possesses natural characteristics
, such as grain variations, growth and bush
marks. These non-weakening marks
Interior Trim Inspection
DIAGNOSIS AND TESTING
WARRANTY COMPLIANCE AND PROCEDURES IN RELATION TO HIGH GLOSS VENEERS
NOTE:
Particular care should be taken to prevent damage from rings, studs, zips and
buckles
Verify the cus
A-Pillar Lower Trim Panel
REMOVAL AND INSTALLATION
REMOVAL
CAUTION:
Make sure that excessive force is not used. Failure to follow this instruction
may result in damage to the
vehicle.
NOTE:
This procedure contains some vari
SEE MORE:
Driver Door Module
DIAGNOSIS AND TESTING
DESCRIPTION AND OPERATION
For a detailed description of the driver/passenger door modules, refer to the
relevant description and operation
sections in the workshop manual.
INSPECTION AND VERIFICATION
CAUTIONS:
Diagnosis by substitution from a donor vehicle is NOT acceptable
Pipes and Hoses
When removing or installing flexible hydraulic pipes and hoses, make sure
that the following procedures are observed
to make sure component serviceability:
Prior to removal, clean area around hose or pipe end which is to be
disconnected.
Obtain appropriate blanking plugs or caps before disconn
© 2010-2026 Copyright www.lrdefender.org
