Land Rover Defender: Rear View Mirrors
SPECIFICATIONS
Torque Specifications
COMPONENT TORQUE LOCATION
.png)
.png)
READ NEXT:
COMPONENT LOCATION
COMPONENT LOCATION - 1 OF 2
NOTES:
Right Hand Drive (RHD) vehicle is shown. Left Hand Drive (LHD)
vehicle is similar.
Vehicle with 5 doors is shown. Vehicle with 3 doors is sim
RVM
The RVM consists of RVM glass in a housing that connects to a mounting
bracket by a ball joint. The mounting
bracket is attached to the front area of the roof and concealed by 2 covers.
Manual Di
DOOR MIRROR ADJUSTMENT
Door mirror adjustment is enabled:
In Power Mode 6 (ignition ON).
For up to 5 minutes after Power Mode 4 (accessory (vehicle unlocked and
Smart Key present) ).
When the dr
SEE MORE:
POWER FLOWS
Operation of the transmission is controlled by the TCM, which electrically
activates various solenoids to control the
transmission gear selection. The sequence of solenoid activation is based on
programed information in the TCM
memory and physical transmission operating conditions such
REMOVAL AND INSTALLATION
PART(S)
REMOVAL
CAUTION:
Be prepared to collect escaping fluids.
Before disconnecting any components, make sure the area is clean and
free from foreign material. When
disconnected all openings must be sealed.
NOTE:
This procedure contains illustrations showing cert
© 2010-2026 Copyright www.lrdefender.org
