Land Rover Defender: Wheel changing
READ NEXT:
Make sure to read and fully understand
the following warnings. Failure to comply
with the safety instructions could result in
an accident, leading to serious injury or
death.
Note: If in any doubt reg
Make sure the relevant safety warnings
have been read and understood before
using the tool kit.
The tool kit is located beneath the
loadspace floor panel.
The tool kit consists of the following:
Make sure to read and fully understand
the following warnings. Failure to comply
with the safety instructions may result in
an accident, leading to serious injury or
death.
Make sure the relevant saf
SEE MORE:
RVM
The RVM consists of RVM glass in a housing that connects to a mounting
bracket by a ball joint. The mounting
bracket is attached to the front area of the roof and concealed by 2 covers.
Manual Dimming RVM
NOTE:
Vehicle with 5 doors is shown. Vehicle with 3 doors is similar.
Lever - Manual di
REMOVAL AND INSTALLATION
SPECIAL TOOL(S)
206-080
Brake caliper piston retractor tool
MATERIALS
GENERAL EQUIPMENT
REMOVAL
CAUTIONS:
Brake discs must be renewed in axle sets.
The brake pad wear sensor must be replaced each time the brake pads
are serviced.
NOTES:
This procedure contains som
© 2010-2026 Copyright www.lrdefender.org
