Land Rover Defender manuals

Land Rover Defender: Rear Drive Halfshafts

SPECIFICATIONS

Recommended Lubricant

Rear Drive Halfshafts

General Specification

Rear Drive Halfshafts

Torque Specification

NOTE: Numbers with green background are a single use components.

COMPONENT TORQUE LOCATION

Rear Drive Halfshafts

Rear Drive Halfshafts

READ NEXT:

 Rear Halfshaft

REMOVAL AND INSTALLATION PART(S) REMOVAL WARNING: Be prepared to collect escaping oil. NOTE: This procedure contains some variation in the illustrations depending on the vehicle specification, bu

 Constant Velocity Joint Boot Kit

REMOVAL AND INSTALLATION SPECIAL TOOL(S) 303-D121 Puller, General Purpose REMOVAL NOTE: This procedure contains some variation in the illustrations depending on the vehicle specification, but the

 Brake System

SEE MORE:

 Intake Manifold - Ingenium I4 2.0l Petrol

REMOVAL AND INSTALLATION PART(S) REMOVAL CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed. NOTE: This procedure contains some variation in the illustrations depending on the vehicle specifica

 Extended mode

Make sure the relevant warnings and cautions have been read and fully understood before adjusting the electronic air suspension. Extended mode is an automatic suspension height setting that raises the vehicle to assist maneuvering in the event that the vehicle is: Grounded in severe off-road con

© 2010-2026 Copyright www.lrdefender.org