Land Rover Defender: Anti-Theft - Active
Land Rover Defender 2020-2026 Service Manual / Electrical / Electronic Feature Group / Anti-Theft - Active
- Anti-Theft - Active - Component Location, Overview
- Anti-Theft - Active - Description
- Anti-Theft - Active - Operation
- Anti-Theft - Active - Control Diagram
- Anti-Theft - Active - Diagnosis and Testing
- Anti-Theft Alarm Horn With Integral Battery
- Hood Switch
READ NEXT:
Anti-Theft - Active - Component Location, Overview
COMPONENT LOCATION
COMPONENT LOCATION - 1 OF 5
NOTES:
Right Hand Drive (RHD) vehicle is shown, Left Hand Drive (LHD)
vehicle is similar.
Vehicle with 5 doors is shown. Vehicle with 3 doors is sim
Anti-Theft - Active - Description
DOOR MODULES
NOTES:
RHD vehicle is shown, LHD vehicle is similar.
Vehicle with 5 doors is shown. Vehicle with 3 doors is similar.
DDM
DRDM
PRDM
PDM
The door modules provide the interface be
Anti-Theft - Active - Operation
DISARMING
The BCM/ GWM automatically arms and disarms the anti-theft system when it
operates the CDL system. The BCM/
GWM also locks and unlocks the Electric Steering Column Lock Control Module
(VIM
SEE MORE:
Solvents, Sealants and Adhesives
DESCRIPTION AND OPERATION
SOLVENTS
WARNING:
Always handle all solvents, sealers and adhesives with extreme care. Some
contain chemicals or give off
fumes which can be dangerous to health. Always follow the manufacturers
instructions. If in doubt about any
substance, particularly a solvent, DO NOT
Main Wiring Harness - 110 - Installation
INSTALLATION
The following step(s) applies to:
All vehicles
1. Install the main wiring harness.
2.
Install the wiring harness grommet.
Install the 4 wiring harness clips.
Connect the 2 SOTA antenna link harness electrical connectors.
3.
Connect the 6 roof pod electrical connectors.
Instal
© 2010-2026 Copyright www.lrdefender.org
