Land Rover Defender: Instrument Cluster
Land Rover Defender 2020-2024 Service Manual / Electrical / Instrumentation and Warning Systems / Instrument Cluster
SPECIFICATIONS
Torque Specifications
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
READ NEXT:
Instrument Panel Cluster
DESCRIPTION AND OPERATION
COMPONENT LOCATION
COMPONENT LOCATION - 1 OF 1
NOTE:
Right Hand Drive (RHD) vehicle is shown, Left Hand Drive (LHD) vehicle is
similar.
Instrument Panel Cluster (IPC)
He
Instrument Cluster - Removal and Installation
REMOVAL AND INSTALLATION
GENERAL EQUIPMENT
REMOVAL
NOTES:
When a new instrument cluster is to be installed, the Jaguar Land
Rover (JLR) approved diagnostic
system must be connected to the vehicl
Instrument Cluster Lens
REMOVAL AND INSTALLATION
REMOVAL
NOTES:
This procedure contains some variation in the illustrations depending
on the vehicle specification, but the
essential information is always correct.
This
SEE MORE:
4X4i overview
Do not operate the touchscreen while
the vehicle is moving. Doing so may
cause driver distraction, leading to a
loss of vehicle control. A loss of vehicle
control could cause vehicle damage,
serious injury, or death.
4x4i allows the user to view off-road
information via the touchscreen or the
instr
Front Door Impact Pressure Sensor
REMOVAL AND INSTALLATION
REMOVAL
WARNINGS:
To prevent accidental deployment, you must power down the Restraints
Control Module (RCM). Wait at
least 1 minute after you disconnect the startup battery ground cable before
you do any work on the
Supplementary Restraint System (SRS). If you do not
© 2010-2024 Copyright www.lrdefender.org
