Land Rover Defender manuals

Land Rover Defender: Bumpers

Land Rover Defender 2020-2026 Service Manual / Body and Paint / Bumpers

SPECIFICATIONS

Torque Specifications

COMPONENT TORQUE LOCATION

Bumpers

Bumpers

Bumpers

Bumpers

Bumpers

Bumpers

READ NEXT:

 Front Bumper

REMOVAL AND INSTALLATION REMOVAL CAUTION: Make sure that the vehicle paintwork is protected. NOTE: This procedure contains some variation in the illustrations depending on the vehicle specificatio

 Front Armature

REMOVAL AND INSTALLATION REMOVAL NOTE: This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct. This p

 Rear Armature

REMOVAL AND INSTALLATION PART(S) REMOVAL WARNING: Observe due care when working near a hot exhaust system. NOTE: This procedure contains some variation in the illustrations depending on the vehic

SEE MORE:

 Main Wiring Harness - 90 - Installation

INSTALLATION The following step(s) applies to: All vehicles 1. Install the main wiring harness. 2. Install the wiring harness grommet. Install the 4 wiring harness clips. Connect the 2 SOTA antenna link harness electrical connectors. 3. Connect the 6 roof pod electrical connectors. Install

 Starting safety

Never start the engine and leave it running when the vehicle is in an enclosed space. Exhaust gases are poisonous and can cause unconsciousness and death if inhaled. If the engine fails to start, do not continue cranking, as this discharges the battery. The catalytic converter may also be damaged

© 2010-2026 Copyright www.lrdefender.org