Land Rover Defender: Tire Pressure Monitoring System Locsync
Land Rover Defender 2020-2026 Service Manual / Chassis / Wheels and Tires / Tire Pressure Monitoring System Locsync
READ NEXT:
Component Location, Overview, Description
COMPONENT LOCATION
Instrument Cluster (IC)
Tire Pressure Monitoring System Control Module (TPMSCM)
Tire pressure sensor - Rear right wheel
Tire pressure sensor - Spare wheel
Tire pressure senso
Operation
A single Tire Pressure Monitoring System (TPMS) hardware configuration is
used. The TPMS status information is
relayed to the driver with a message, displayed in the Instrument Cluster (IC)
message
Tire Pressure Monitoring System - Diagnosis and Testing
DIAGNOSIS AND TESTING
PRINCIPLES OF OPERATION
For a detailed description of the Tire Pressure Monitoring System, refer to
the relevant Description and Operation
section in the workshop manual.
INSPEC
SEE MORE:
Canvas Roof Motor
REMOVAL AND INSTALLATION
REMOVAL
WARNINGS:
Both motors must be replaced at the same time due to software
compatibility.
Make sure the ignition is OFF before carrying out this procedure.
CAUTIONS:
Do not remove the windshield.
Take extra care not to damage any components on removal.
NOTES:
Startup Battery
PART(S)
ALL VEHICLES
REPAIR
Startup Battery (REMOVAL AND INSTALLATION)
REMOVAL AND INSTALLATION
GENERAL EQUIPMENT
REMOVAL
NOTES:
This procedure contains some variation in the illustrations depending
on the vehicle specification, but the
essential information is always correct.
This procedure
© 2010-2026 Copyright www.lrdefender.org
