Land Rover Defender: Supplementary Restraint System Health and Safety Precautions
DESCRIPTION AND OPERATION
WARNINGS:
CAUTIONS:
- Pyrotechnic components must not be subjected to temperatures higher
than 110ºC.
- Never install aftermarket accessories to the vehicle on or adjacent
to the supplemental restraint system
module.
Note: Refer to this document before carrying out any work on the
Supplementary Restraint System (SRS).
READ NEXT:
DESCRIPTION AND OPERATION
NOTE:
For additional information on systems/components that must be checked, refer to
the relevant section in the
Workshop Manual.
Vehicle inspections may be carried out for
NOTES:
There is some variation in the illustrations depending on the vehicle
specification, but the essential
information is always correct.
NAS and Canada VIN is located on the Tire Data/Specif
SEE MORE:
REMOVAL AND INSTALLATION
REMOVAL
CAUTIONS:
Place the glass on felt covered supports. Do not stand on edge as
this can cause chips which
subsequently develop into cracks.
Protect the surrounding paintwork to avoid damage.
NOTES:
This procedure contains some variation in the illustrations dep
REMOVAL AND INSTALLATION
REMOVAL
WARNING:
Make sure the ignition is OFF before carrying out this procedure.
CAUTIONS:
Do not close the canvas roof within 12 hours of installing the canvas
roof frame assembly.
Do not remove the windshield.
Take extra care not to damage any components on removal
© 2010-2024 Copyright www.lrdefender.org