Land Rover Defender: Description and Operation
Land Rover Defender 2020-2026 Service Manual / Chassis / Ride and Handling Optimization / Description and Operation
READ NEXT:
Component Location, Overview
COMPONENT LOCATION
Integrated Power Brake
Transfer Case Control Module (TCCM)
Interactive Display Module 'A' (IDMA)
Chassis Control Module (CHCM)
Interactive Control Interface Module 'A' (ICIMA
Description
TERRAIN RESPONSE SWITCHPACK
Terrain Response switchpack (TR)
The Terrain Response (TR) program selection available on the IDMA menu. Each
program is denoted by a symbol
that represents the relate
Operation
When the Terrain Response (TR) switch operated, and the rotary switch turned
to select, the signal goes from the
ICIMA:
To the HVAC Control Module (HVAC) through the Private High Speed (HS)
Contr
SEE MORE:
Principles of Operation, Inspection and Verification
PRINCIPLES OF OPERATION
For a detailed description of the power steering system and operation, refer
to the relevant description and operation
section of the workshop manual.
INSPECTION AND VERIFICATION
CAUTION:
Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution
of cont
C-Pillar Side Impact Sensor
REMOVAL AND INSTALLATION
REMOVAL
WARNINGS:
To prevent accidental deployment, you must power down the Restraints
Control Module (RCM). Wait at
least 1 minute after you disconnect the startup battery ground cable before
you do any work on the
Supplementary Restraint System (SRS). If you do not
© 2010-2026 Copyright www.lrdefender.org
