Land Rover Defender manuals

Land Rover Defender: Battery Care Sheet

Land Rover Defender 2020-2026 Service Manual / Electrical / Battery and Charging System / Battery and Charging System - General Information / Battery Care Sheet

DESCRIPTION AND OPERATION

BATTERY CARE SHEET

Replacement startup and auxiliary batteries for service.

NOTE: Fields marked with * are mandatory and must be completed.

Battery Care Sheet

Do the battery care requirements and record the results below.

Battery Care Sheet

Battery Care Sheet

Battery Report Form - In Service Batteries Only

DESCRIPTION AND OPERATION

NOTE: Fields marked with * are mandatory and must be completed.

Battery Report Form - In Service Batteries Only

Battery Report Form - In Service Batteries Only

Showroom and Slave Battery Condition Report Form

DESCRIPTION AND OPERATION

SHOWROOM BATTERY CARE FORM

Showroom and Slave Battery Condition Report Form

NOTE: The Slave battery should be the same specification as the original vehicle battery.

Showroom and Slave Battery Condition Report Form

Vehicle Battery Charging Log

Showroom and Slave Battery Condition Report Form

Showroom and Slave Battery Condition Report Form

READ NEXT:

 Quiescent Drain

DESCRIPTION AND OPERATION VEHICLE QUIESCENT CURRENT TEST If a customer complains of a startup battery that discharges continuously or when left for a prolonged period of time, it is recommended that

 Charging System

DIAGNOSIS AND TESTING PRINCIPLE OF OPERATION For a detailed description of the charging system and operation, refer to the relevant description and operation section of the workshop manual. Battery C

 Battery Support Unit Connection Procedure

GENERAL PROCEDURES CONNECT WARNINGS: Do not smoke or carry lighted tobacco or open flame of any type when working on or near the vehicles battery. Highly flammable vapors may be present and ignit

SEE MORE:

 Pairing and connecting using the phone

Make sure the relevant safety warnings have been read and understood before operating the phone features. Note: The process of pairing and connecting with the vehicle, from the phone, varies depending on the type of phone used. Pairing and connecting a phone for the first time: 1. Switch the igniti

 Approach Lamp

REMOVAL AND INSTALLATION REMOVAL NOTE: This procedure contains illustrations showing certain components removed to provide extra clarity. This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct. 1. R

© 2010-2026 Copyright www.lrdefender.org