Land Rover Defender: Roof blind
To operate the roof blind: Press the rear of the roof blind switch to the second position and release. The blind fully opens. A further press stops movement of the blind.
Alternatively, press the rear of the roof blind switch to the first position and hold until the blind reaches the desired position. Release the switch.
Press the front of the roof blind switch to the second position and release. The blind fully closes. A further press stops movement of the blind.
Alternatively, press the front of the roof blind switch to the first position and hold until the blind reaches the desired position. Release the switch.
SOLAR ATTENUATING GLASS
The solar attenuating glass windshield filters sunlight passing through a special laminated layer.
Electronic actuating cards, such as toll road payment cards or Radio Frequency (RF) ID tags, can be fixed at the dedicated locations. The locations are on the inside of the windshield. If the cards are located at any other part of a solar attenuating windshield, the electronic scanners may not recognise them.
The fixing location is at the top of the windshield, as shown at (1), close to the forward-facing camera cover.
Note: The electronic actuating card should be in the size appropriate location on the driver's side of the windshield.
Note: Transponders, mounted on the front license plate plinth, can be used as an alternative, dependent on the market and availability.
READ NEXT:
Storage compartments
STORAGE COMPARTMENTS
Make sure any items stored in the
vehicle are secure and cannot move. If
the vehicle is involved in an accident, or
is subject to sudden braking or a change
of direction, loose
Auxiliary power sockets
Only use approved accessories. Using any
other equipment may damage the
vehicle's electrical system. If in any doubt,
contact a retailer/authorized repairer.
The engine should be running when using
Wireless charger
Metallic objects may become hot if they
are placed between the mobile device
and the charging mat, which may result
in serious injuries.
Note: Do not place anything other than
a Qi-compatible mobile
SEE MORE:
Suspension System - General Information
SPECIFICATIONS
* Measurement taken with vehicle at unladen weight
Wheel Alignment Specification - Front - Air Spring Suspension - Non
Plug-in Hybrid Electric Vehicle (PHEV)
NOTE:
All figures are with vehicle at 'Showroom' ride height - full fluids, full tank
of fuel, no occupants/luggage, tires
i
Operation
CHASSIS CONTROL MODULE
The CHCM uses a combination of information from other system modules and data
from the accelerometers and
suspension height sensors to measure the vehicle and suspension states and
driver inputs. Using this information, the
CHCM applies algorithms to control the shock absorb
