Land Rover Defender: Jacking and Lifting
READ NEXT:
PRELIMINARY ADVICE
WARNING:
Make sure that the vehicle is stable before completing any work.
CAUTION:
Make sure the deployable side steps are set to 'Roof Access' mode (if equipped).
Do not jack or l
4 POST LIFT
Vehicle On Wheels
WARNING:
If the driveshaft(s)/halfshaft(s) require disconnecting, the vehicle must be
lifted wheel free.
Do not move the vehicle forward and backward on the 4 post lift
SEE MORE:
REMOVAL AND INSTALLATION
PART(S)
REMOVAL
NOTE:
This procedure contains some variation in the illustrations depending
on the vehicle specification, but the
essential information is always correct.
This procedure contains illustrations showing certain components
removed to provide extra clari
FRONT ROW SEATBELTS
The outer of the front seatbelt retractors are attached to the vehicle body
on the lower B-pillar. The webbing runs from
the retractor, through the seatbelt D-loop which is installed on the upper
B-pillar, to an anchor point. The anchor point
is located at the base of the seat
© 2010-2026 Copyright www.lrdefender.org
