Land Rover Defender: Wipers and washers
READ NEXT:
Do not operate the wipers on a dry
windshield as the wipers may cause
damage to its surface.
Remove any snow, ice, or frost from the
windshield, around the wiper arms and
blades, and the cowl area,
Note: Static droplets may not be detected
when the vehicle is first started. A single
wipe should be used to clear the
windshield.
Note: If the wash/wipe control is in the
AUTO position, the wipers do
Make sure that the wiper arms are in the
winter park position before lifting the
wiper blades away from the windshield.
Failure to do so, may result in damage to
the bonnet.
When the vehicle is park
SEE MORE:
MATTE BONNET DECAL - PART NUMBER:
VPLEB0438
REMOVAL AND INSTALLATION
WARNING:
Accessories which are not correctly installed can be dangerous. Read the
instructions carefully prior to
installation. Comply with instructions at all times. If in doubt, contact your
nearest approved retailer.
CAUTIONS:
REMOVAL AND INSTALLATION
PART(S)
REMOVAL
WARNING:
Residual air pressure may be present in the system. Take care when releasing air
line connectors.
CAUTION:
Before disconnecting any components, make sure the area is clean and free from
foreign material. When
disconnected all openings must be sea
© 2010-2026 Copyright www.lrdefender.org
