Land Rover Defender: Transmission
Land Rover Defender 2020-2025 Owner's Manual / Transmission
READ NEXT:
Automatic transmission
P should only be engaged when the
vehicle is stationary. If any other gear
position is selected while the vehicle is
stationary, the vehicle can move
unexpectedly, which may result in death
or serio
Selecting high and low range
Do not change from high range to low
range while the vehicle is in motion. Doing
so can result in damage to the
transmission.
The Lo button is used to alternate the
engagement of the transfer case b
SEE MORE:
Enabling all terrain progress control (ATPC)
Make sure the relevant safety warnings
have been read and understood before
using All Terrain Progress Control
(ATPC).
ATPC can be enabled when the vehicle is
stationary or moving. When enabled, the
system defaults to descent control mode.
The ATPC button is located on the front
control panel. The
Main Wiring Harness - 90 - Installation
INSTALLATION
The following step(s) applies to:
All vehicles
1. Install the main wiring harness.
2.
Install the wiring harness grommet.
Install the 4 wiring harness clips.
Connect the 2 SOTA antenna link harness electrical connectors.
3.
Connect the 6 roof pod electrical connectors.
Install
© 2010-2025 Copyright www.lrdefender.org
