Land Rover Defender: Steering System - General Information
Land Rover Defender 2020-2025 Service Manual / Chassis / Steering System / Steering System - General Information
- Principles of Operation, Inspection and Verification
- Electric Power Steering Gear Inspection - With Heavy/Notchy Steering Gear
- Steering and Wheel Alignment
READ NEXT:
Principles of Operation, Inspection and Verification
PRINCIPLES OF OPERATION
For a detailed description of the power steering system and operation, refer
to the relevant description and operation
section of the workshop manual.
INSPECTION AND VERIFICAT
Electric Power Steering Gear Inspection - With Heavy/Notchy Steering Gear
ELECTRIC POWER STEERING GEAR INSPECTION - WITH HEAVY/NOTCHY STEERING GEAR
NOTE:
Some variation in the illustrations may occur, but the essential information is
always correct.
Electric Power Steering
Steering and Wheel Alignment
Vehicles with steering wheel angles within +/-3 degrees to the horizontal as
shown in illustration E257061 should not
be adjusted as they meet Jaguar Land Rover specifications.
NOTE:
Dependent on sp
SEE MORE:
Crankshaft Pulley - Ingenium I4 2.0l Petrol
REMOVAL AND INSTALLATION
SPECIAL TOOL(S)
JLR-303-1628
Remover/Installer, Front Crankshaft Seal
JLR-303-1630
Locking Tool, Crankshaft Pulley
PART(S)
REMOVAL
NOTE:
This procedure contains some variation in the illustrations depending
on the vehicle specification, but the
essential information
Main Wiring Harness - 110 - Removal
REMOVAL
The following step(s) applies to:
All vehicles
NOTES:
This procedure contains some variation in the illustrations depending
on the vehicle specification, but the
essential information is always correct.
This procedure contains illustrations for left hand drive vehicles,
right hand dr
© 2010-2025 Copyright www.lrdefender.org
