Land Rover Defender: Overview
The following warning and information lamps may illuminate in the instrument panel:
BATTERY CHARGE
(RED).
USA: BRAKE (RED).
Canada: BRAKE (RED).
CRITICAL WARNING
MESSAGE (RED).
ELECTRIC PARKING
BRAKE (EPB) (RED).
ENGINE
TEMPERATURE (RED).
LANE DEPARTURE
WARNING (RED).
LOW OIL PRESSURE
(RED).
SEAT BELT (RED).
AIR BAG (AMBER).
ANTI-LOCK BRAKING
SYSTEM (ABS) (AMBER).
BRAKE (AMBER).
CHECK ENGINE
(AMBER).
DRIVER CONDITION
MONITOR (AMBER).
DYNAMIC STABILITY
CONTROL (DSC) (AMBER).
DYNAMIC STABILITY
CONTROL (DSC) OFF
(AMBER).
EXTERNAL
TEMPERATURE (AMBER).
GENERAL WARNING
AND INFORMATION
MESSAGE (AMBER).
LOW FUEL WARNING
(AMBER).
REAR FOG LIGHTS
(AMBER).
TIRE PRESSURE
MONITORING SYSTEM (TPMS)
(AMBER).
ADAPTIVE CRUISE
CONTROL ACTIVE (GREEN).
ADAPTIVE SPEED
LIMITER (GREEN).
ALL TERRAIN
PROGRESS CONTROL (ATPC)
(GREEN).
AUTO STOP/START
(GREEN).
BRAKE HOLD
(GREEN).
CRUISE CONTROL
(GREEN).
FOLLOW MODE
(GREEN).
FRONT FOG LIGHTS
(GREEN).
GEARSHIFT (GREEN).
HILL DESCENT
CONTROL (HDC) (GREEN).
LANE DEPARTURE
WARNING (GREEN).
LOW BEAM (GREEN).
LOW RANGE (GREEN).
SIDE LIGHTS (GREEN).
SPEED LIMITER
(GREEN).
STEERING ASSIST
ACTIVE (GREEN).
TRAILER TURN
SIGNALS (GREEN).
TURN SIGNALS
(GREEN).
AUTO HIGH BEAM
ASSIST (AHBA) (BLUE).
HIGH BEAM (BLUE).
STEERING ASSIST
NOT ACTIVE (GRAY).
AUTO HIGH BEAM
ASSIST (AHBA) (WHITE).
AUTO LIGHTS (WHITE)
AUTO STOP/START
INHIBIT (WHITE).
AUTO STOP/START
OFF (WHITE).
DRIVER CONDITION
MONITOR (WHITE).
LOW TRACTION
LAUNCH (WHITE).
READ NEXT:
Warning lamps and indicators
Do not ignore warning lamps or
indicators. Take appropriate action as
soon as possible. Failure to do so may
result in death or serious injury, or
serious damage to the vehicle.
Red warning lamps are
Exterior lights overview
The lighting system operates automatically
depending upon the ambient lighting
conditions. The system selects the
appropriate lighting function, low beam
or Daytime Running Light (DRL), for the
condit
SEE MORE:
Profile settings
Make sure the relevant safety warnings
and cautions have been read and
understood before driving the vehicle.
Profiles gives the option to delete existing
profiles or amend the detail of stored
profiles.
To access the Profile settings:
1. Touch the settings icon¹ from any
screen.
2. Touch the AL
Air Suspension Compressor
REMOVAL AND INSTALLATION
GENERAL EQUIPMENT
EQUIPMENT NAME
2 mm punch
PART(S)
REMOVAL
CAUTION:
Before disconnecting any components, make sure the area is clean and free from
foreign material. When
disconnected all openings must be sealed.
NOTE:
This procedure contains some variation in the ill
